Memberships & Affiliations
7F Users Group

7F Users Group

7F Users Group, Inc. has grown dramatically since its first meeting in Baltimore, November 19-20, 1991, attended by 14 O&M personnel from four companies. The only 7F engine in service at that time was Virginia Electric & Power Co’s Chesterfield 7. It had been integrated with an existing steamer and new heat-recovery steam generator to configure a 1 x 1 combined cycle.Fast forward to today: The OEM has shipped to customers more than 1000 F-class gas turbines since Chesterfield 7 left the shop. the majority of these units are 7FAs.

7x24 Exchange International

7x24 Exchange International

7×24 Exchange is the leading knowledge exchange for those who design, build, operate and maintain mission-critical enterprise information infrastructures. The organization’s goal is to improve end-to-end reliability by promoting dialogue among these groups. 7×24 Exchange is committed to addressing the challenges of sustainability and giving back through its social responsibility initiative.

American Society of Mechanical Engineers

American Society of Mechanical Engineers

ASME is a not-for-profit membership organization that enables collaboration, knowledge sharing, career enrichment, and skills development across all engineering disciplines, toward a goal of helping the global engineering community develop solutions to benefit lives and livelihoods. Founded in 1880 by a small group of leading industrialists, ASME has grown through the decades to include more than 130,000 members in 158 countries. Thirty-thousand of these members are students.

American Welding Society

American Welding Society

Headquartered in Miami, Florida, and led by a volunteer organization of officers and directors, AWS serves over 70,000 members worldwide and is composed of 22 Districts with 250 Sections and student chapters. The Society is dedicated to supporting hundreds of thousands of industry professionals, including: welders, business leaders, sales and service teams, manufacturers, vendors, associations, educational institutions, committee volunteers, and students. We connect welding communities from around the world into a collaborative force, built on a foundation of higher standards; advanced learning; and rewarding growth.

Association for Data Center Management Professionals

Association for Data Center Management Professionals

AFCOM advances data center professionals by delivering comprehensive and vendor-neutral education and peer-to-peer networking to its members around the globe. Through forward-looking research by Data Center Institute, publications including Data Center Management Magazine, local chapters, regional symposiums, and major events like Data Center World, AFCOM supports thousands of data center professionals in their career advancement. In serving the greater data center industry for more than 30 years, AFCOM has earned recognition as the market leader in connecting the data center community.

Association for Operations Management

Association for Operations Management

The Association for Operations Management is the global leader and premier source of the body of knowledge in supply chain and operations management, including production, inventory, materials management, purchasing, and logistics. Since 1957, individuals and companies have relied on APICS for its superior training, internationally recognized certifications, comprehensive resources and worldwide network of accomplished industry professionals.

Electrical Generating Systems Association

Electrical Generating Systems Association

The EGSA is the world’s largest organization exclusively dedicated to onsite power generation. The association is comprised of 700 companies — Manufacturers, Distributor/Dealers, Contractors/Integrators, Manufacturer’s Representatives, Consulting & Specifying Engineers, Service Firms, End Users and others — throughout the U.S. and around the world that make, sell, distribute and use onsite power generation technology and equipment, including generators, engines, switchgear, controls, voltage regulators, governors and much more.

Energy Coalition for Contractor Safety (ECCS)

Energy Coalition for Contractor Safety (ECCS)

The Energy Coalition for Contractor Safety (ECCS) is a group of North Dakota companies working together to achieve workplace safety excellence through standardized workplace safety practices, training and drug screening of contractor employees.

Gas Compressor Association

Gas Compressor Association

The GCA is a professional trade organization dedicated to the enrichment of its members and their industry: products and services for the natural gas compression market.

Gas Machinery Research Council

Gas Machinery Research Council

The GMRC is a not-for-profit research corporation that was founded in 1952. GMRC provides its member companies and industry with the benefits of an applied research and technology program directed toward improving reliability and cost effectiveness of the design, construction, and operation of mechanical and fluid systems. GMRC serves the industry through technical training programs and conferences, including the annual Gas Machinery Conference & Exhibit. GMRC is a subsidiary of Southern Gas Association. 

Gas Processors Association

Gas Processors Association

The GPA has been engaged in shaping the midstream sector of the U.S. energy industry since 1921: setting and adopting standards for natural gas liquids; developing simple and reproducible test methods to define the industry’s raw materials and products; managing a cooperative research program that is used worldwide; providing a voice for our industry on Capitol Hill; being the go-to resource for a multitude of technical reports and publications; and so much more. Our annual GPA Convention has become the meeting place for midstream professionals from around the globe.

Gas Processors Suppliers Association

Gas Processors Suppliers Association

GPSA companies provide a multitude of services and supplies to the midstream industry. Each year, hundreds of GPSA members join more than 2,000 representatives from midstream operating companies and their own service and supplier peers at the annual GPA Convention held in April in the United States, creating an open forum to share midstream research, standards and business exchanges. GPSA is located in Tulsa, Okla., where it has operated since its beginning.

ISNetworld Member Contractor

ISNetworld Member Contractor

ISNetworld brings together Hiring Clients and contractors, creating safer work environments and lasting partnerships. Maintaining safety, insurance, quality and regulatory information on contractors and suppliers can often be a strain on internal resources. ISN streamlines these processes, saving time and improving safety standards. Hiring Clients use ISNetworld to standardize contractor management across multiple sites and geographic regions, clearly communicate requirements and expectations and exchange data with other internal systems. The result is lower incident rates and higher compliance numbers.

National Association of Corrosion Engineers

National Association of Corrosion Engineers

NACE International, The Worldwide Corrosion Authority, serves nearly 35,000+ members in 130 countries and is recognized globally as the premier authority for corrosion control solutions. The organization offers technical training and certification programs, conferences, industry standards, reports, publications, technical journals, government relations activities and more. NACE International is headquartered in Houston, Texas, with offices in San Diego, California; Kuala Lumpur, Malaysia; Shanghai, China and Al-Khobar, Saudi Arabia. 

New York City Department of Environmental Protection

New York City Department of Environmental Protection

DEP is a New York City agency of nearly 6,000 employees that manages and conserves the City’s water supply; distributes more than one billion gallons of clean drinking water each day to nine million New Yorkers and collects wastewater through a vast underground network of pipes, regulators, and pumping stations; and treats the 1.3 billion gallons of wastewater that New Yorkers produce each day in a way that protects the quality of New York Harbor. To achieve these mandates, DEP oversees one of the largest capital construction programs in the region. As the City agency responsible for New York City's environment, DEP also regulates air quality, hazardous waste, and critical quality of life issues, including noise.

Northeastern Lumber Manufacturers Association

Northeastern Lumber Manufacturers Association

The Northeastern Lumber Manufacturers Association (NELMA) is the rules writing agency for Eastern White Pine lumber and the grading authority for Eastern Spruce, Balsam Fir, Spruce-Pine-Fir (SPFs) grouping, and other commercially important eastern softwood lumber species. In addition, NELMA is a leading agency for export wood packaging certification and the marketing voice for the wood products industry in the Northeast.

SAE International

SAE International

SAE International is a global association of more than 128,000 engineers and related technical experts in the aerospace, automotive and commercial-vehicle industries. SAE International’s core competencies are lifelong learning and voluntary consensus standards development. SAE International’s charitable arm is the SAE Foundation, which supports many programs, including A World In Motion® and the Collegiate Design Series.

Southern Gas Association

Southern Gas Association

SGA has been a cornerstone of the natural gas industry for more than 100 years. Founded in 1908, SGA set out to concern itself with technical and sales issues, and to devise solutions to common problems within the natural gas industry.

Steel Tank Institute

Steel Tank Institute

STI/SPFA is a trade association representing fabricators of steel construction products and their suppliers. Member companies produce steel storage tanks, field erected water tanks, pressure vessels and heat exchangers, and pipe and pipelines. Their customers are from the petrochemical, power generation, food, pharmaceutical, fuels, wastewater and water transmission industries. STI/SPFA brings to its members the benefits of association with two internationally respected organizations in the steel fabrication industry – the Steel Tank Institute (1916) and the Steel Plate Fabricators Association (1933).

Stoughton Wisconsin Chamber of Commerce

Stoughton Wisconsin Chamber of Commerce

The Stoughton Chamber is an association of businesses, organizations and individuals who believe that by working together to promote the commercial and economic development of Stoughton, the quality of life in our community will be enhanced.The mission of the Stoughton Chamber of Commerce is to promote the progressive development of our area economy while serving the needs of our members. In accomplishing our mission, the Chamber works in a variety of roles including economic development, planning, being an information source for residents and visitors, a business advocate, serving as liaison with city and county government and referral service.

The Energy Industries Council

The Energy Industries Council

The EIC is the leading trade association providing dedicated services to help members understand, identify and pursue business opportunities globally. Established in 1943, the EIC is a not-for-profit organisation with a membership of over 650 UK-registered companies who deliver goods and services to the energy industries worldwide.

Our goal is to put our members first and serve them well, providing one of the most comprehensive sources of energy projects and business intelligence in the energy sector today.The EIC is renowned for excellence in the provision of services that unlock opportunities for our members, helping the supply chain to win business across the globe.

The Society for Protective Coatings

The Society for Protective Coatings

SSPC is the only non-profit association that is focused on the protection and preservation of concrete, steel and other industrial and marine structures and surfaces through the use of high-performance protective, marine and industrial coatings. SSPC is the leading source of information on surface preparation, coating selection, coating application, environmental regulations, and health and safety issues that affect the protective coatings industry.

Western Turbine Users Inc.

Western Turbine Users Inc.

WTUI is a membership organization of GE LM2500, LM5000, and LM6000 users, manufacturers and suppliers. The organization is a California Corporation funded through annual membership and conference fees. WTUI was founded in 1990 and has approximately 80 power facilities represented and more than 100 suppliers. OEMs and suppliers support WTUI through their participation in the annual conference and in technical discussions.

Wisconsin Manufacturers & Commerce (WMC)

Wisconsin Manufacturers & Commerce (WMC)

Founded in 1911, Wisconsin Manufacturers & Commerce is the state’s chamber of commerce and largest business trade association representing more than 3,700 employers of every size and from every sector of the economy.